Posts Tagged ‘air compressors’

Some Advantages Of Screw Air Compressors

Friday, October 15th, 2021

Screw compressors are usually available in two main designs: dry screw compressors or wet/oil-filled screw compressors. Both types of compressors consist of rotors that are tightly interconnected. 

The dry screw compressor has no oil between the screws. The dry screw compressor consists of two tightly coupled rotors mounted in cylinder bores with close clearances. You can also look for the best screw air compressors through various online sources.

Rotary Screw Air Compressor

Image Source: Google

The oil-filled screw compressor also has a pair of tightly connected rotors mounted in the narrow bore of the cylinder; With oil-flooded screw compressors, the gap dimensions are not as narrow as that of dry screw compressors. 

Most screw compressors are of the oil type. There are two types – semi-hermetic and open drive type. With the former, the motor is located in the same housing as the compressor, with the latter, the motor is located outside the compressor housing and therefore requires a shaft seal. 

The only moving parts in a screw compressor are the two interlocking spiral rotors. The rotor consists of a male wing acting as a moving piston and a female groove acting as a cylinder.

The screw compressor requires very little maintenance because the rotor rotates at a conservative speed and is well lubricated with cooking oil.

The main advantage of screw compressors is that they allow high-pressure ratios to be achieved in one mode. To handle this large volume with a reciprocating compressor, a two-stage unit is required.

How Do Rotary Screw Air Compressors Operate?

Wednesday, October 6th, 2021

Rotor screw compressors are the most commonly used compressor in industrial settings. These rotary screw compressors are subject to many bizarre ideas. Many of these ideas are related to winterization and cold weather.

Many people believe that their compressor will not be affected by outside temperatures because it is located inside a heated building. You can also look for the best screw air compressors through compressedair.net.au/screw-air-compressors/.

Rotary Screw Air Compressor

Image Source: Google

The fact that oil coolers are vented to the exterior of buildings is a problem, however, proves this false. Oil can get too thick if it is kept in a cooler that is not exposed to cold air. 

Many rotary screw compressors include thermal or bypass valves for oil cooling. This protects the compressor parts in cold conditions during startup.

To ensure it works properly, the valve should be checked regularly. Because synthetic oil circulates at lower temperatures, it can be useful. The problem is water buildup in the oil sump.

Condensation can build up in the airlines of rotary screw compressors when it is cold. The sensors can send wrong signals to the computer control systems of the screw compressors.

This can cause damage to expensive parts of the compressor and other components if it is not properly drained.

Businesses often take their rotary screw compressors out of service during winter months. If winterizing the screw compressors is done properly, this can be beneficial. This includes oil and filter change. The motor's bearings and compressor parts can be damaged by used oil.

Basic Things About Air Compressor

Wednesday, August 25th, 2021

Compressed air is an integral part of most production processes. However, it is one of the most efficient, inexpensive, and usefull tools in a manufacturing facility.

The air converters increases the intake air pressure by reducing its volume. Most air compressors are based on blowers or rotating vanes that compress the air.

Air Compressor

Image Source: Google

Of course, due to physics and thermodynamics itself, compressed air becomes inefficient. Most of the electricity consumed by the motor that drives the air compressor heats the air. 

Then the air coming out of the compressor must be cooled, which requires fans and air- or water-cooled heat exchanger, which consumes more energy.

After the air is compressed, it must be delivered to the end-user at a certain pressure. When transporting air, losses and inefficiencies occur along the way.

An air compressor is a device that uses an electric motor to convert electricity into potential energy in the form of compressed air, which is then pushed by the compressor into a storage tank.

Compressed air is then used in various industries by utilizing the kinetic energy of the air to release it. Consumers choose to maintain existing machinery and equipment and continue to use existing compressors rather than investing in new equipment to reduce the high start-up capital costs associated with new contributions. 

The compressor system is the upstream part of the cleaning and dehumidifying system, as it has a positive effect on the functionality and efficiency of the compressor.